Highly Tunable Cascaded Metasurfaces for Continuous Two‐Dimensional Beam Steering

Cascaded metasurfaces can exhibit powerful dynamic light manipulation by mechanically tuning the far-field interactions in the layers. However, in most current designs, the metasurfaces are separated by gaps smaller than a wavelength to form a total phase profile, representing the direct accumulation of the phase profiles of each layer. Such small gap sizes may not only conflict with the far-field conditions but also pose great difficulties for practical implementations. To overcome this limitation, a design paradigm taking advantage of a ray-tracing scheme that allows the cascaded metasurfaces to operate optimally at easily achievable gap sizes is proposed. Enabled by the relative lateral translation of two cascaded metasurfaces, a continuous two-dimensional (2D) beam-steering device for 1064 nm light is designed as a proof of concept. Simulation results demonstrate tuning ranges of ±45° for biaxial deflection angles within ±3.5 mm biaxial translations, while keeping the divergence of deflected light less than 0.007°. The experimental results agree well with theoretical predictions, and a uniform optical efficiency is observed. The generializeddesign paradigm can pave a way towards myriad tunable cascaded metasurface devices for various applications, including but not limited to light detection and ranging (LiDAR) and free space optical communication.