准静态过程
材料科学
微观结构
极限抗拉强度
制作
过程(计算)
疲劳极限
准静态载荷
复合材料
融合
灵敏度(控制系统)
制造工艺
工作(物理)
复合数
损伤容限
结构工程
压力(语言学)
图层(电子)
机械工程
计算机科学
工程类
哲学
电子工程
语言学
替代医学
病理
操作系统
物理
医学
量子力学
作者
Mohamed Merghany,Mirko Teschke,Felix Stern,Jochen Tenkamp,Frank Walther
标识
DOI:10.3389/fmech.2022.957859
摘要
Additive manufacturing (AM) using the powder bed fusion (PBF) process is building up the components layer by layer, which enables the fabrication of complex 3D structures with unprecedented degrees of freedom. Due to the high cooling rates of the AM process, fine microstructures are generated. This leads to an improvement in quasistatic properties such as tensile strength, whereas the fatigue strength is comparable to that of conventionally manufactured metal or even reduced. This is due to the presence of process-induced defects formulated during the manufacturing process in combination with the increased notch stress sensitivity of high-strength metals. In this work, the fatigue damage assessment using different approaches like those of Murakami and Shiozawa for three AM alloys (AlSi10Mg, 316L, and TNM-B1) containing defects is studied for better understanding of capability and mechanisms. Moreover, the effect of the lightweight potential is investigated, and how the specific material density can be considered when the fatigue damage tolerance is characterized.
科研通智能强力驱动
Strongly Powered by AbleSci AI