Thermosetting polymers, used in a wide variety of applications ranging from microelectronics to composite airplane wings, are susceptible to damage in the form of cracking.Often these cracks form deep within the structure where detection is difficult and repair is virtually impossible.In fiber reinforced polymer composites, cracking in the form of fiber-matrix interfacial debonding, ply delamination, and simple matrix cracking leads to degradation.In microelectronics, polymer encapsulates and polymer matrix composite printed circuit boards suffer from similar forms of damage, but in addition to mechanical failure, cracks cause electrical failure of the component.Microcracking induced by thermal and mechanical fatigue is a longstanding problem in polymer adhesives.Regardless of the application, once cracks have formed within polymeric materials, the integrity of the structure is significantly compromised.The concept of self-repair has been discussed previously, but the only successful crack healing methods that have been reported require some form of manual intervention.Inspired by biological systems in which damage triggers a healing response, here we demonstrate the development of a new structural polymeric material with the ability to autonomically heal cracks.Experiments on fracture specimens have yielded as much as 75% recovery of virgin toughness.This work will lead to safer and more reliable materials in a wide range of applications and represents the first step in developing materials systems that possess greatly extended lifetimes