耐撞性
材料科学
结构工程
分级(工程)
故障评估
有限元法
工程类
挡风玻璃
管(容器)
偏转(物理)
弹道学
作者
Daifeng Yang,Jianbo Chen,Yining Zhang,Qiqi Li,Xiaoli Jia,Perk Lin Chong,Eric Li
标识
DOI:10.1016/j.tws.2026.115670
摘要
Hierarchical multi-cell tubes (HMTs) are promising energy-absorbing structures due to their superior crashworthiness compared with conventional thin-walled tubes. In this work, HMTs with different hierarchical orders are systematically investigated under axial quasi-static compression. Finite element simulations, supported by experimental material characterisation, are performed to examine the effects of hierarchical order and thickness design under equal-mass constraints. The results show that increasing hierarchical order markedly enhances energy absorption efficiency and crushing stability. Under equal-mass conditions, the highest-order configuration (HMT-3) achieves the best comprehensive performance, with a maximum specific energy absorption (SEA) of 38.79 J/g and a crushing force efficiency (CFE) of 0.87, representing improvements of approximately 19.5% in SEA compared with the non-hierarchical baseline. Parametric studies further demonstrate that thickness grading provides an effective means to tailor the crushing response. Axial thickness grading primarily reshapes the force-displacement history by suppressing early-stage resistance, whereas radial thickness grading enhances SEA by up to 14.1% without inducing a significant increase in peak crushing force (PCF). An analytical model based on the simplified super-folding element theory is developed to predict the mean crushing force (MCF) of uniform-thickness HMTs, and the theoretical predictions agree well with numerical results, with discrepancies generally below 10%. Compared with representative hexagonal multi-cell tube designs reported in the literature under identical geometric, material, and mass constraints, the proposed HMT-3 exhibits a favourable balance between SEA, PCF, and CFE.
科研通智能强力驱动
Strongly Powered by AbleSci AI