摩擦学
材料科学
耐磨性
润滑
涂层
冶金
摩擦系数
基质(水族馆)
粉末冶金
摩擦系数
边界润滑
复合材料
微观结构
海洋学
地质学
作者
Xinmin Li,Ulf Olofsson,Ellen Bergseth
标识
DOI:10.1080/10402004.2016.1146379
摘要
Coating is one of the innovative approaches used to improve the wear resistance and load-carrying capacity of surfaces in rolling–sliding contact, such as gears and rolling element bearings. In this study, the tribological performance of standard gear material (EN 16MnCr5) and two kinds of powder metallurgy (PM) gear material (Distaloy AQ + 0.2% C and Astaloy 85Mo +0.2% C) with and without tribofilms formed by a pretreatment were evaluated. Specimens treated with the pretreatment and the substrate were subjected to pin-on-disc tests under boundary lubrication conditions. The friction and wear performance of the two different PM gear materials with the pretreatment-formed tribofilm were compared to RS-RS (EN 16MnCr5 material disc and pin combination) for reference. It was found that the pretreatment lowers the friction coefficient and enhances the wear resistance of pins because of the tribofilm formed. The tribofilm caused good running-in due to the existence of and Fe and W oxides. Mo-Mo (Astaloy 85Mo + 0.2% C material disc and pin combination) and Mo-RS (Astaloy 85Mo + 0.2% C disc and EN 16MnCr5 pin combination) showed statistically significant higher wear resistance.
科研通智能强力驱动
Strongly Powered by AbleSci AI