The effect of geometry on mixing efficiency for microfluidic device

作者
Ayeh Darooeizadeh
出处
期刊:ETS - Espace ÉTS [École de Technologie Supérieure]
摘要

Micromixers have had a huge growth in past few decades and the fabrication of simple devices leads us to have so many results on different micromixer devices with a variety of techniques. They perform as one of the most important elements in attaining microfluidic system for biological and medical applications. Liposomes are one of the most noticeable nanoparticles used as a carrier in drug delivery for medical applications. The production of liposomes using micromixers and microfluidic devices have overcome so many barriers in this field. Enhancement in mixing process by adding a barrier on the channel walls such as periodic disturbance mixer (PDM), micromixer which we are introducing in this work, would reduce the mixing length and lead us to a higher mixing efficiency. A novel passive-micromixer design has been used for this part of research which named PDM micromixer. A well designed micromixer has rapid mixing and compact size and always must have this in mind that the time of mixing is the key element specially for industrial usage. The shape of the microchannels is another important parameter in designing a micromixer and they are usually connected to a series of planar channel engaging in sudden changes in the flow direction. The two main categories for micromixers are active and passive which for active micromixers an external energy force is applied to perturb the samples and for the passive, the contact area and contact time of the samples are increasing through the configuration of the design. In this dissertation, numerical modeling was used to evaluate and investigate the micromixing process for mixing efficiency through microfluidic devices and a comparison between different geometries which are simple Y and PDM structures, and different sizes of each geometry have been done. A set of controlling parameters have been chosen to identify the optimum geometry and size which were a range of flow rate ratio (FRR) and total flow rate ratio (TFR), and three different aspect ratios for two different designs to see which one has the best efficiency for fluid mixing. As a part of evaluation of the design, a set of measurements for produced liposomes has been conducted to see what the effect of the aspect ratio is, TFR and FRR on the size range of produced liposomes since medical applications have a huge interest in microfluidic devices due to the ability in producing controlled-size liposomes and size distribution.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
美满的安柏完成签到,获得积分10
刚刚
yingzi完成签到,获得积分10
1秒前
NexusExplorer的应助被Cold采纳,获得10
2秒前
ladyyoung完成签到,获得积分10
2秒前
3秒前
耶耶发布了新的文献求助10
3秒前
明亮涫发布了新的文献求助20
4秒前
四时令发布了新的文献求助30
4秒前
5秒前
6秒前
ayida完成签到,获得积分10
6秒前
粗犷的书蝶完成签到,获得积分20
6秒前
yhn发布了新的文献求助10
6秒前
6秒前
6秒前
漠尘完成签到,获得积分10
7秒前
7秒前
7秒前
8秒前
9秒前
9秒前
Qing发布了新的文献求助10
9秒前
9秒前
9秒前
Xueanliu发布了新的文献求助10
10秒前
wangQ发布了新的文献求助10
10秒前
12秒前
稳重电话发布了新的文献求助10
12秒前
14秒前
Felix发布了新的文献求助10
14秒前
14秒前
年轻烨霖发布了新的文献求助10
14秒前
天天向上发布了新的文献求助10
14秒前
zkb发布了新的文献求助30
15秒前
entscholar完成签到,获得积分10
16秒前
16秒前
17秒前
Owen的应助被强强采纳,获得10
17秒前
小蘑菇的应助被科研通管家采纳,获得10
17秒前
Owen的应助被科研通管家采纳,获得10
17秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8193599
求助须知:如何正确求助?哪些是违规求助? 9579723
关于积分的说明 21867157
捐赠科研通 7793198
什么是DOI,文献DOI怎么找? 3437314
关于科研通互助平台的介绍 2560725
邀请新用户注册赠送积分活动 2484193