线性扫描伏安法
材料科学
氧传感器
循环伏安法
非阻塞I/O
电化学气体传感器
检出限
电解质
电极
电化学
催化作用
极化(电化学)
化学工程
无机化学
氧化钇稳定氧化锆
氧气
化学
复合材料
陶瓷
色谱法
有机化学
工程类
立方氧化锆
生物化学
物理化学
作者
Qi Lu,Lingchu Huang,Xidong Hao,Weijia Li,Bin Wang,Tong Wang,Xishuang Liang,Fangmeng Liu,Chenguang Wang,Geyu Lu
标识
DOI:10.1016/j.snb.2021.130043
摘要
Abstract YSZ-based mixed potential type NH3 sensor has a good application foreground in on-board SCR (Selective Catalytic Reduction) system due to its good thermal and chemical stability. In this study, we greatly improved the NH3 sensing performance of this type of sensor to meet the detection requirement through the development of high-performance sensing electrode materials. FeVO4 was synthesized through a traditional sol-gel method and used as basis material. In order to improve the electrochemical catalytic activity, different molar ratio of metal oxides (NiO, SnO2, WO3) modified FeVO4 were prepared. The cyclic voltammetry (CV), the linear sweep voltammetry (LSV) and dc polarization (I–V) measurements were carried out to confirm the electrochemical catalytic activity of the sensing electrode materials. Eventually, the sensor attached with 20 mol.% NiO modified FeVO4-SE exhibited the highest response (−83 mV) to 100 ppm NH3 and had a low detection limit of 5 ppm. What is more, the sensor also displayed short response and recovery time, satisfying oxygen resistance and good stability over 20 days at 650 °C, indicating its potential for in-situ ammonia monitoring in industrial and automotive applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI