溶解
沉积作用
铜
离子强度
碳酸盐
化学
粒径
纳米颗粒
粒子(生态学)
磷酸盐
化学工程
表面电荷
沉积物
矿物学
环境化学
地质学
有机化学
水溶液
古生物学
物理化学
工程类
海洋学
作者
Jon R. Conway,Adeyemi S. Adeleye,Jorge L. Gardea‐Torresdey,Arturo A. Keller
摘要
Time-dependent aggregation, sedimentation, dissolution, and transformation of three copper-based engineered nanomaterials (ENMs) of varied properties were measured in eight natural and artificial waters. Nano-Cu and Cu(OH)2 aggregated rapidly to >10(3) nm while the aggregate size of nano-CuO averaged between 250 and 400 nm. Aggregate size for both nano-Cu and nano-CuO showed a positive correlation with ionic strength with a few exceptions. Aggregate size did not correlate well with sedimentation rate, suggesting sedimentation was influenced by other factors. Controlling factors in sedimentation rates varied by particle: Cu(OH)2 particles remained stable in all waters but groundwater, nano-Cu was generally unstable except in waters with high organic content, and nano-CuO was stabilized by the presence of phosphate, which reversed surface charge polarity at concentrations as low as 0.1 mg PO4(3-) L(-1). Dissolution generally correlated with pH, although in saline waters, dissolved copper formed insoluble complexes. Nano-Cu was rapidly oxidized, resulting in dissolution immediately followed by the formation of precipitates. These results suggest factors including phosphate, carbonate, and ENM oxidation state may be key in determining Cu ENM behavior in natural waters.
科研通智能强力驱动
Strongly Powered by AbleSci AI