合金
材料科学
铝
X射线
融合
原位
激光器
流量(数学)
冶金
光学
机械
化学
物理
语言学
哲学
有机化学
作者
Qilin Guo,Minglei Qu,Luis I. Escano,S. Mohammad H. Hojjatzadeh,Zachary A. Young,Kamel Fezzaa,Lianyi Chen
标识
DOI:10.1016/j.ijmachtools.2022.103861
摘要
Laser metal additive manufacturing technologies enable the fabrication of geometrically and compositionally complex parts unachievable by conventional manufacturing methods. However, the certification and qualification of additively manufactured parts are greatly hindered by the stochastic melt flow instabilities intrinsic to the process, which has not been explicitly revealed by direct observation. Here, we report the mechanisms of the melt flow instabilities in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-resolution synchrotron X-ray imaging. We identified powder/droplet impact, significant keyhole oscillation, and melting-mode switching as three major mechanisms for causing melt flow instabilities. We demonstrated the detrimental consequences of these instabilities brought to the process, and presented new understanding on the melt flow evolution and keyhole oscillation. This work provides critical insights into process instabilities during laser metal additive manufacturing, which may guide the development of instability mitigation approaches. The results reported here are also important for the development and validation of high-fidelity computational models. • Experimental characterization of melt flow instabilities via in-situ X-ray imaging. • Revealed three melt flow instability mechanisms with quantified analysis. • Discussed the effect of instabilities on the additive manufacturing process. • Completed the melt flow evolution path among different melting modes. • Explored the mechanisms for causing keyhole oscillations.
科研通智能强力驱动
Strongly Powered by AbleSci AI