Improving the surface integrity of laser cladded layer by ultrasonic-assisted burnishing at medium temperature with considering initial surface conditions

表面完整性 抛光(金属) 材料科学 残余应力 表面粗糙度 机械加工 激光器 复合材料 冶金 表面光洁度 光学 抛光 物理
作者
Peirong Zhang,Chenglong Jin,Qi–Chuan Jiang,Zurong Zhang
出处
期刊:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture [SAGE Publishing]
卷期号:237 (3): 452-467 被引量:4
标识
DOI:10.1177/09544054221101746
摘要

Improving the surface integrity of laser cladded layer via burnishing is an important research topic in remanufacturing field. However, the initial surface roughness condition induced by mechanical machining generates great influence on the strengthening mechanism of subsequent burnishing. In this study, the effects of ultrasonic-assisted burnishing (UB) and ultrasonic-assisted warm burnishing (UWB) on the surface integrity of laser cladded layer were analyzed when treated on different surface conditions obtained by turning with different feed parameters. The results indicated that both the UB and UWB treatments would cause great improvements in microhardness, surface roughness including height and functional parameters, and residual stress of the laser cladded layer when compared to those by turning. First, the severe plastic deformation in UB and UWB treatments counteracted the thermal softening effect in turning process, so that the machined surface could maintain high hardness. Second, UB treatment reduced the roughness by 70% compared with turning, while the surface roughness after UWB treatment was even 30% lower than that obtained by UB. Third, the tensile residual stress shifted to deep compressive state by both UB and UWB treatments, though the thermal load in UWB generated a negative effect on generating compressive residual stress. According to the surface integrity evaluation results by radar diagrams, turning with feed f = 0.2 mm/r and UWB is preferred in machining of the laser cladded layer for enhanced surface integrity. On the basis of this research, it is expected to achieve the purpose of high-efficiency and high-quality cutting of the laser cladded layer.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
Orange的应助被而发的采纳,获得10
刚刚
1秒前
小黄完成签到 ,获得积分10
1秒前
儒雅小蜜蜂完成签到 ,获得积分10
2秒前
2秒前
情怀的应助被AA制采纳,获得10
2秒前
英俊的铭的应助被赵若冰采纳,获得10
3秒前
dozr发布了新的文献求助10
3秒前
假装学霸发布了新的文献求助10
3秒前
是丹丹呀完成签到,获得积分10
4秒前
天天向上的应助被木子采纳,获得10
4秒前
5秒前
hamster666完成签到 ,获得积分10
5秒前
6秒前
Akim的应助被1212采纳,获得10
6秒前
7秒前
焦焦完成签到,获得积分10
7秒前
8秒前
8秒前
颜林林完成签到,获得积分10
9秒前
67发布了新的文献求助10
10秒前
可耐的箴完成签到,获得积分10
10秒前
zouzailubian发布了新的文献求助10
10秒前
假装学霸完成签到,获得积分10
11秒前
乐乐的应助被Nie采纳,获得10
12秒前
orixero的应助被fanfan采纳,获得10
12秒前
无花果的应助被null采纳,获得10
13秒前
汉堡包的应助被西瓜一块两块采纳,获得10
14秒前
子昂完成签到,获得积分10
15秒前
jin的应助被苏槑特采纳,获得10
15秒前
15秒前
Lucas的应助被啦啦啦啦采纳,获得30
15秒前
RNAPW完成签到,获得积分10
16秒前
16秒前
科研通AI2S的应助被忐忑的白凡采纳,获得10
16秒前
思源的应助被lovesf采纳,获得30
16秒前
yyh123发布了新的文献求助10
16秒前
16秒前
而发的发布了新的文献求助10
17秒前
jinmh完成签到,获得积分10
18秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
Resource Recovery Handbook 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8174954
求助须知:如何正确求助?哪些是违规求助? 9566841
关于积分的说明 21788580
捐赠科研通 7769186
什么是DOI,文献DOI怎么找? 3431808
关于科研通互助平台的介绍 2556035
邀请新用户注册赠送积分活动 2477196