Presurgical imaging of the subscapular artery with three‐dimensional‐computed tomography angiography: Application to harvesting subscapular system free‐flaps

Abstract A subscapular system free‐flap is extremely useful for maxillofacial reconstruction since it facilitates the simultaneous harvesting of multiple flaps using one subscapular artery (SSA) alone. However, cases of aberrations in the SSAs have been reported. Therefore, the morphology of SSA needs to be confirmed preoperatively before harvesting the flaps. Recent developments in imaging, such as three‐dimensional (3D) computed tomography angiography (3D CTA), facilitate obtain high‐quality images of blood vessel images. Therefore, we examined the utility of 3D CTA in navigating the course of the SSA before harvesting subscapular system free‐flaps. We examined the morphology and aberrations of the SSA using 39 sides of the 3D CTA data and 22 sides of Japanese cadavers. SSAs can be classified into types S, I, P, and A. Type S SSAs are significantly long (mean length = 44.8 mm). Types I and P SSAs have short mean lengths, measuring ≤2 cm in approximately 50% of cases. In type A, the SSA is absent. The frequency of types S, I, P, and A SSAs were 28.2%, 7.7%, 51.3%, and 12.8%, respectively. Type S can be advantageous for harvesting the SSA in subscapular system free‐flaps, because it is significantly longer. In contrast, types I and P might be dangerous because their mean lengths are shorter. In type A, caution is needed not to injure the axillary artery because the SSA is absent. When surgeons need to harvest the SSA, presurgical 3D CTA is recommended.