可穿戴计算机
计算机科学
嵌入式系统
无线
计算机硬件
电子线路
炸薯条
集成电路
过程(计算)
电气工程
工程类
电信
操作系统
作者
Ah‐Hyoung Lee,Ji-Hun Lee,Vincent Leung,Arto V Nurmikko
出处
期刊:Advanced Science
[Wiley]
日期:2023-10-30
卷期号:10 (36): e2306111-e2306111
被引量:6
标识
DOI:10.1002/advs.202306111
摘要
Wearable and implantable microscale electronic sensors have been developed for a range of biomedical applications. The sensors, typically millimeter size silicon microchips, are sought for multiple sensing functions but are severely constrained by size and power. To address these challenges, a hardware programmable application-specific integrated circuit design is proposed and post-process methodology is exemplified by the design of battery-less wireless microchips. Specifically, both mixed-signal and radio frequency circuits are designed by incorporating metal fuses and anti-fuses on the top metal layer to enable programmability of any number of features in hardware of the system-on-chip (SoC) designs. This is accomplished in post-foundry editing by combining laser ablation and focused ion beam processing. The programmability provided by the technique can significantly accelerate the SoC chip development process by enabling the exploration of multiple internal circuit parameters without the requirement of additional programming pads or extra power consumption. As examples, experimental results are described for sub-millimeter size complementary metal-oxide-semiconductor microchips being developed for wireless electroencephalogram sensors and as implantable microstimulators for neural interfaces. The editing technique can be broadly applicable for miniaturized biomedical wearables and implants, opening up new possibilities for their expedited development and adoption in the field of smart healthcare.
科研通智能强力驱动
Strongly Powered by AbleSci AI