Recycling municipal solid waste incineration fly ash in super-lightweight aggregates by sintering with clay and using SiC as bloating agent

Municipal solid waste incineration (MSWI) fly ash is classified as hazardous waste and requires proper treatments. Sintering of MSWI fly ash for the production of lightweight aggregate (LWA) is a promising treatment technology, while the dependence on natural bloating clay to produce high quality LWA has limited its wide application. In this study, by using SiC as a bloating agent, normal clay could be used to produce super-lightweight aggregate (bulk density <500 kg/m3) with MSWI fly ash. Effects of SiC addition amount, sintering temperature and duration on LWA performance were studied. The results showed that LWA with SiC addition of 0.1-0.5 wt% had significant expansion at sintering temperature of 1120 °C-1160 °C. The optimal conditions were 0.3 wt% SiC addition and sintering at 1120 °C for 30 min, and the bulk density could reach 212 kg/m3 with other properties meeting the LWA standard (GB/T 17431.1-2010). Further, the heavy metal leaching toxicity was significantly decreased after sintering and met the MSWI fly ash utilization standard (HJ 1134-2020). The X-ray diffraction results revealed the formation of a complex diopside-based phase after sintering. This study provides a new approach for recycling MSWI fly ash in LWA without dependence on specific clay resources, and makes this technology wider applicability.