汽车工程
差速器(机械装置)
车辆动力学
制动距离
计算机科学
控制器(灌溉)
制动系统
控制理论(社会学)
转向系统
控制工程
工程类
制动器
控制(管理)
航空航天工程
人工智能
生物
农学
作者
Sukwon Kim,Y. Kim,Sangjin Kim,Seungju Moon
摘要
As the electrification of chassis systems accelerates, the demand for fail-safety strategies is increasing. In the past, the steering system was mechanically connected, so the driver could respond directly to some extent. However, the Steer-by-Wire (SbW) system is composed of the column and rack bar as electrical signals, so the importance of response strategies for steering system failure is gradually increasing. When a steering system failure occurs, a differential braking control using the difference in braking force between the left and right wheels was studied. Recently, some studies have been conducted to model the wheel reaction force generated during a differential braking. Since actual tires and road surfaces are nonlinear and cause large model errors, model-based control methods have limited performance. Also, in previous studies assumed that the driver normally operates the steering wheel in a failure situation. However, if limited to a situation such as autonomous driving, the driver’s handling may become abrupt. So, the information from the steering wheel angle sensor is difficult to trust for calculating the target yaw rate. This paper proposes a new fail-safety strategy to prepare for electric power steering (EPS) failure in an autonomous driving situation. In this study, the target yaw rate was calculated using a camera sensor instead of steering wheel angle sensor, when the steering fails. And we estimated the road surface reaction force generated during a differential braking by using a disturbance observer. And the braking controller was configured to compensate for the estimated road reaction force.
科研通智能强力驱动
Strongly Powered by AbleSci AI