Effect of Novel pH Regulators on Copper film Chemical Mechanical Polishing for Ruthenium-Based Copper Interconnect under Weak Alkalinity Conditions

For Ruthenium (Ru)-based copper (Cu) interconnects Cu film chemical mechanical polishing (CMP), it is crucial to select appropriate pH regulators in the slurry to ensure the chemical reactions and maintain the stability of the polishing chemical environment. In this study, the effects of inorganic pH regulator KOH, organic pH regulator diethanolamine (DEA), and 2-amino-2-methyl-1-propanol (AMP) on CMP and slurry properties of Cu film were compared. It was found when using AMP as a pH regulator, the Cu/Ru removal rate selectivity (RRS) can reach 598:1, the surface roughness of Cu film decreased to 0.76 nm, and the slurry can remain stable for at least 7 d. The performance order of the three pH regulators is AMP＞KOH＞DEA. Meanwhile, through experimental results and test analysis, it has been confirmed that AMP can also play a multifunctional role as a complexing agent, dispersant, and surfactant. Therefore, AMP can replace KOH as a new pH regulator in weak alkaline slurries. This result plays an important role in guiding the selection of organic pH regulators in the optimization of Cu film CMP slurry.