New fabric phase sorptive extraction for nondestructive analysis of heritage textile samples

Several types of pesticides used in museum collections over time become dangerous for people who may handle textile articles treated with such substances. In the case of the analysis of ancient, modern, and contemporary textile materials, it is particularly important to keep the artifacts intact, as they cannot be replaced. The need to use micro- or nondestructive techniques led to the development of methods such as solid-phase microextraction (SPME), liquid‒liquid dispersive microextraction (DLLME), and single-droplet microextraction (SDME). In this paper is described an optimized extraction method of three pesticides (malathion, methoxychlor, and permethrin) by creating a non-destructive solid phase extraction system on a textile support, abbreviated FPSE - 100 % cotton fabric coated with a sol-gel solution prepared from a polymer (PEG or PDMS). To obtain a suitable FPSE, the following parameters were evaluated: polymer selection (individual or mixture of polymers), acid catalyst (trifluoroacetic acid, acetic acid and hydrochloride acid), amount of polymer (1.0 g, 2.5 g or 5.0 g), polymerization time (30 min, 120 min and 240 min), ultrasonic bath temperature (40 °C and 70 °C), and type of bath to obtain the sol-gel (ultrasonic bath, water bath with stirring and mechanical stirrer). To complete the FPSE optimization, the influence of pesticide extraction time on FPSE and desorption from FPSE in ethyl acetate was also assessed. The pesticides extraction yields obtained for the laboratory textile samples are in the range of 52.7 %-128.0 %. The technique proposed in the manuscript proved to be effective as a nondestructive tool for evaluating and quantifying the presence of pesticides in textile museum collections. The approach described here reduces heritage object damage due to sampling compared to methods commonly employed and may represent a starting point for future research.