Broad bandwidth study of the topography of natural rock surfaces

The mechanical and hydraulic behavior of discontinuities in rock, such as joints and faults, depends strongly on the topography of the contacting surfaces and the degree of correlation between them. Understanding this behavior over the scales of interest in the earth requires knowledge of how topography or roughness varies with surface size. Using two surface profilers, each sensitive to a particular scale of topographic features, we have studied the topography of various natural rock surfaces from wavelengths less than 20 microns to nearly 1 meter. The surfaces studied included fresh natural joints (mode I cracks) in both crystalline and sedimentary rocks, a frictional wear surface formed by glaciation, and a bedding plane surface. There is remarkable similarity among these surfaces. Each surface has a “red noise” power spectrum over the entire frequency band studied, with the power falling off on average between 2 and 3 orders of magnitude per decade increase in spatial frequency. This implies a strong increase in rms height with surface size, which has little tendency to level off for wavelengths up to 1 meter. These observations can be interpreted using a fractal model of topography. In this model the scaling of the surface roughness is described by the fractal dimension D . The topography of these natural rock surfaces cannot be described by a single fractal dimension, for this parameter was found to vary significantly with the frequency band considered. This observed inhomogeneity in the scaling parameter implies that extrapolation of roughness to other bands of interest should be done with care. Study of the increase in rms height with profile length for two extreme cases from our data provides an idea of the expected variation in mechanical and hydraulic properties for natural discontinuities in rock. This indicates that in addition to the scaling of topography, the degree of correlation between the contacting surfaces is important to quantify.