温度系数
电阻率和电导率
退火(玻璃)
材料科学
铂金
钽
薄膜
大气温度范围
复合材料
晶界
分析化学(期刊)
冶金
矿物学
纳米技术
化学
微观结构
电气工程
生物化学
物理
色谱法
气象学
工程类
催化作用
作者
Timo Schössler,Florian Schön,Christian Lemier,Gerald Anton Urban
出处
期刊:Thin Solid Films
[Elsevier BV]
日期:2020-02-22
卷期号:698: 137877-137877
被引量:43
标识
DOI:10.1016/j.tsf.2020.137877
摘要
The influence of high temperature annealing up to 800∘C on electrical resistivity and temperature coefficient of resistance of magnetron sputtered platinum films were investigated experimentally and theoretically. Highly adherent platinum films were manufactured on silicon oxide interfaces without using additional adhesion layers like titanium or tantalum. Such platinum films can be extremely useful for the fabrication of microelectromechanical sensors. X-ray diffraction studies exhibit grain sizes in the range of 39 nm for the as-deposited case to 162 nm after annealing at 800 ∘C. Thereby film resistivity values decrease from 16.8 ± 0.4 µΩ cm to 12.7 ± 0.2 µΩ cm and temperature coefficient of resistance values increase from 2180 ppm/K to 2810 ppm/K. A good accordance to the model of Mayadas and Shatzkes for resistivity as well as Tellier and Tosser for temperature coefficient of resistance could be found. The reflection coefficient for electrons at grain boundaries is extracted for both models.
科研通智能强力驱动
Strongly Powered by AbleSci AI