GSM演进的增强数据速率
材料科学
计算机模拟
铝
合金
冶金
还原(数学)
结构工程
复合材料
机械
工程类
数学
几何学
物理
电信
作者
Jiuba Wen,Junguang He,Yangyang Liu
标识
DOI:10.1016/j.promfg.2019.12.029
摘要
Rolling edge crack of 5052 aluminum alloy under one-pass (reductions of 35%, 40%, 50%, 60%, respectively) and multi-pass rolling at total reductions of 60% (two-pass, three-pass, four-pass and five-pass, respectively) at room temperature was analyzed by numerical simulation combined with experiments. Through the simulation of rolling process, damage was obtained. The maximum damage concentrated in the edge position and grew gradually with the increase of reduction (one-pass). As changing the rolling passes, damage with three-pass rolling is the least. Experimental results and simulation results were in good agreement. The optimum rolling scheme under 60% reductions was 3-time rolling with the least crack length (test: 1.3 mm, simulation: 1.4 mm, error of 7%).
科研通智能强力驱动
Strongly Powered by AbleSci AI