Multidirectional Triple-Shape-Memory Polymer by Tunable Cross-linking and Crystallization

-polyisoprene (TPI) and paraffin were prepared by melt blending and compression molding, and then the TPI was cross-linked by vulcanization. As a result of the large difference in the melting temperature and crystallization temperature between TPI and paraffin, the obtained polymer materials exhibit a triple-shape-memory behavior. According to the analysis of crystal behavior, microscopic morphology, and mechanical properties of the materials with different paraffin contents and TPI cross-linking density by differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, and dynamic mechanical thermal analysis, the shape-memory behavior of the obtained materials was tunable by the cross-linking density of TPI and the crystallization degree of TPI or paraffin. Compared with the traditional triple-shape-memory material, our samples are prepared in a more facile way and can recover at human body temperature (37 °C). Moreover, our TPI/paraffin material can realize more flexible multidirectional recovery, as well as can be reprogramed and used multiple times. To the best of our knowledge, there are few polymer materials reported, which can realize multidirectional recovery. These unique multidirectional and reprogramable properties will enable the application of this polymer material, especially in the medical fixing materials.