膜
质子交换膜燃料电池
高分子化学
质子
材料科学
离聚物
燃料电池
化学工程
化学
复合材料
聚合物
工程类
共聚物
物理
生物化学
量子力学
作者
Zhi Li Long,Junpei Miyake,Kenji Miyatake
标识
DOI:10.1021/acsaem.9b01513
摘要
The six kinds of sulfonated poly(arylene perfluoroalkylene) (SPAF) ionomers with pendant multi-sulfophenylene groups were designed and synthesized to apply to fuel cells as proton exchange membranes. The SPAF polymers possessed high ion exchange capacity (IEC) values (2.07–2.15 mequiv g –1 ), good solubility in organic solvents, and high molecular weight, providing the flexible membranes by solution casting. Compared with our previous SPAF-MM membrane (with no pendant sulfophenylene groups), the introduction of the pendant sulfophenylene groups resulted in the significant improvement of proton conductivity, whereas it did not deteriorate the other favorable membrane properties, such as gas impermeability and mechanical properties. The SPAF-BM, as the chosen membrane, exhibited higher fuel cell performance than that of our previous SPAF-MM membrane under low humidified conditions. During the open circuit voltage (OCV) hold test, the SPAF-BM cell showed the low average decay of 40 μV h –1 and kept high OCV even after 1000 h. Post-test analyses proved that the SPAF-BM membrane after the OCV hold test retained the original fuel cell performance without practical changes in the molecular structure and molecular weight due to the high chemical stability of SPAF-BM.
科研通智能强力驱动
Strongly Powered by AbleSci AI