材料科学
纱线
复合材料
碳纳米管
石墨烯
温度测量
螺旋(铁路)
电阻式触摸屏
大气温度范围
基质(水族馆)
复合数
芯(光纤)
干扰(通信)
限制器
涂层
天然橡胶
炭黑
失真(音乐)
补偿(心理学)
热的
限制
纤维
拉伤
变形(气象学)
芳纶
可靠性(半导体)
热稳定性
图层(电子)
氧化物
信号(编程语言)
声学
光电子学
焦耳加热
噪音(视频)
航程(航空)
热阻
作者
Zhe Li,Yawen Wei,Yingcun Liu,Zhe Sun,Li Niu,Jian Hua Fang
标识
DOI:10.1021/acsaelm.5c02546
摘要
Textile-based temperature sensors often suffer from signal distortion due to strain interference in practical applications, severely limiting their reliability in dynamic environments. To address this challenge, this study developed a strain-insensitive resistive temperature-sensing yarn with a helical structure, named CNAS. The yarn utilizes aramid fiber as the substrate. After modification with polydopamine (PDA), single-walled carbon nanotubes (SWCNTs) were loaded onto the substrate through five cycles of dipping and drying. Subsequently, a uniform nickel oxide (NiO) sensitive layer was constructed on its surface via electrodeposition followed by thermal decomposition. The sensitive yarn (CNA) was then helically wrapped onto a prestretched Spandex core yarn to form the CNAS composite yarn. Experimental results demonstrate that CNAS exhibits a resistance variation below 4% within a strain range of 0–93% and maintains stable performance after 500 stretching cycles. It displays a significant negative temperature coefficient (NTC) behavior within a temperature range of −20 to 70 °C, with its sensitivity markedly superior to that of pure carbon nanotube (CNT) or graphene (GR) yarns. Human wear trials further confirmed that the yarn can effectively distinguish temperature changes from strain interference induced by joint movements. An alarm system built using CNAS enables reliable visual alerts for ambient temperature changes. This research provides an innovative and practical solution for anti-interference wearable temperature sensors.
科研通智能强力驱动
Strongly Powered by AbleSci AI