材料科学
电介质
硅酮
有机硅树脂
固化(化学)
热稳定性
复合材料
化学计量学
化学工程
介电损耗
烧焦
氮气
高分子化学
降级(电信)
介电常数
热的
水溶液
反应速率常数
硅橡胶
化学改性
网络结构
化学反应
作者
Lei Xue,Zongheng Lu,Zhizhou Yang
标识
DOI:10.1080/10601325.2026.2734937
摘要
A Si–OH‑containing silicone resin (R1) and a Si–H‑containing crosslinker (M1) were synthesized and used to construct silicone resin networks through the Piers-Rubinsztajn(P-R) reaction. The hydroxyl content of R1 was quantified by chemical end-capping followed by1H NMR analysis, providing a stoichiometric basis for calculating the required amount of M1. By tuning the loading of M1, cured networks with different contents of Si–O–Ar-containing segments were prepared. The P-R reaction effectively introduced rigid Si–O–Ar linkages into the crosslinked network. Compared with the conventionally cured resin, the P-R-cured resins showed improved thermo-oxidative, hydrophobic, and dielectric properties. In particular, the one with the highest Si–O–Ar content exhibited a 5% weight-loss temperature of 521 °C in nitrogen and 508 °C in air, with char yields of 86.10% and 60.40% at 800 °C, respectively. It also showed a reduced water uptake of 0.18%, low dielectric constant (Dk) of 2.49, and improved hardness. These results demonstrate that P-R curing is an effective strategy for preparing silicone resin dielectric materials for high-frequency electronic packaging applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI