生产(经济)
蒸馏
环境科学
工艺工程
材料科学
分馏塔
水冷
渗滤
锅炉给水
化学
膜
废物管理
制浆造纸工业
膜技术
作者
Mehdi Moradi,Mahdi Sahebi
标识
DOI:10.1016/j.rineng.2026.111790
摘要
Membrane distillation (MD) is a thermally driven separation process with the capability to utilize low-grade heat sources. In this study, the thermal performance of a direct contact membrane distillation (DCMD) system for desalinating saline water in desert conditions was experimentally examined. To enhance heat transfer across the membrane, triangular turbulators with different geometries and positions were employed to disrupt the thermal boundary layer and intensify convective heat transfer. The results show that increasing the temperature gradient between the hot feed and cold permeate streams significantly enhances vapor transport and water production. The use of turbulators further improved both permeate flux and energy efficiency, with flux increases exceeding 50% and efficiency improvements of up to 37% in some cases. Additionally, the integration of a solar thermal system with the MD process was evaluated, confirming the feasibility of renewable heat utilization. The solar-assisted MD system, combined with turbulators, achieved water fluxes up to 49 LMH while maintaining a salt rejection rate above 99.9%. This work provides a structured case study in heat transfer enhancement and solar-thermal integration, offering practical insights for the development of more efficient and sustainable thermal desalination systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI