串联
开路电压
钙钛矿(结构)
钝化
材料科学
光电子学
硅
异质结
电压
带隙
短路
能量转换效率
纳米技术
电气工程
化学
图层(电子)
工程类
复合材料
结晶学
作者
Fuhua Hou,Lingling Yan,Biao Shi,Junfan Chen,Shijie Zhu,Qianshang Ren,Shichong An,Zhongxin Zhou,Huizhi Ren,Changchun Wei,Qian Huang,Guofu Hou,Xinliang Chen,Yuelong Li,Yi Ding,Guangcai Wang,Dekun Zhang,Ying Zhao,Xiaodan Zhang
标识
DOI:10.1021/acsaem.8b00926
摘要
Perovskite/silicon tandem solar cells with high theoretical efficiency, low cost, and the potential for simple mass production have received significant attention. To maintain the current matching, increasing the open-circuit voltage ( V OC ) of the top and bottom subcells is an effective route to enhance the efficiency of tandem solar cells (TSCs). In this paper, we focus on a strategy for increasing the V OC and simultaneously maintaining a high efficiency of over 20%. Perovskite thin films with added Cs in traditional FAMA cations have shown a large grain, smooth surface morphology, wider band gap, and reduced defects, which together bring about a TSC V OC of 1.78 V. In addition, the high minority carrier lifetime (τ eff ) of bottom silicon solar cells resulting from the good passivation of a-Si:H/c-Si interface enhance the V OC values to as high as 1.83 V, which is the highest value for perovskite/silicon TSCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI