Cathode-Supported All-Solid-State Lithium–Sulfur Batteries with High Cell-Level Energy Density

Bulk-type all-solid-state lithium batteries (ASSLBs) are being considered as a promising technology to improve the safety and energy density of today’s batteries. However, current bulk-type ASSLBs suffer from low cell-level energy density due to the challenges in reducing the electrolyte thickness. In this work, we report cathode-supported ASSLBs with a thin solid electrolyte layer. Starting from a stainless steel mesh-supported Li 2 S cathode, we are able to build an ASSLB with a ∼100 μm thick Li 3 PS 4 electrolyte reinforced by a Kevlar nonwoven scaffold and with Li metal as the anode. The ASSLB delivers a high capacity with high rate and cycling performances at room temperature. Moreover, the unique cell design also enabled utilization of a thick cathode with a Li 2 S loading of 7.64 mg cm –2, providing a high cell-level energy density (excluding the current collectors) of 370.6 Wh kg –1 for the first cycle.