Polymeric micro gas preconcentrators based on graphene oxide and carbon nanopowder adsorbents for gas detection application

In this study, an application of novel polymer-based microfluidic channels for preconcentration and detection of methane gas is investigated. Poly (methyl methacrylate) (PMMA) microfluidic channel is filled by graphene oxide (GO) as a new adsorbent for thermal preconcentration and carbon nanopowder is loaded into a polydimethylsiloxane (PDMS) microfluidic channel. The effective microfluidic channels area is 14 mm × 10 mm. The laser cutting and etching followed by thermally-solvent bonding process are used for PMMA microfluidic channel fabrication. Also, PDMS microfluidic channel is fabricated by SU-8 molding technique, lithography process, and oxygen plasma bonding on glass. SEM, Raman spectroscopy, and FTIR characterizations are carried out for investigation of the synthesized GO. The amount of electrical power consumption of devices is also investigated by simulation and experiment. The performance of both micro preconcentrators (μPCs) are compared through the similar experimental tests which exhibit the suitable performance of fabricated μPCs with proper repeatability for preconcentration purposes. The effect of gas flow rate, heating rate, gas exposure time, and gas concentration are investigated for both microfluidic channels and their optimized values were obtained. According to the lower desorption temperature of GO, despite its slightly lower response (10.41) compared to carbon nanopowder μPCs (12.34), due to its almost half power consumption (0.375 W in comparison with 0.8 W), it can be an appropriate candidate for preconcentration applications. PMMA and PDMS-based microfluidic channels show promising choices in the preconcentration application for the adsorbents with low desorption temperatures. As a result, PMMA as a low-cost material with a simple fabrication process in microchannels and GO as the novel adsorbent material can be suitable candidates in low working temperature and rapid preconcentration devices.