光电流
异质结
材料科学
光电阴极
覆盖层
氧化物
单斜晶系
结晶度
光电子学
光催化
晶格常数
晶体结构
结晶学
化学
光学
电子
物理化学
催化作用
衍射
复合材料
冶金
生物化学
物理
量子力学
作者
Seung Ki Baek,Joo Sung Kim,Young Dae Yun,Young Been Kim,Hyung Koun Cho
标识
DOI:10.1021/acssuschemeng.8b01715
摘要
To effectively transport photogenerated charges within a cuprous oxide (Cu 2 O) photocathode and to transfer them to the electrolyte, cupric oxide (CuO) as a heterojunction material enable to provide the additional built-in electric field is perfectly suitable band position and can be produced from the original Cu 2 O films by simple oxidation process. However, their different crystal structures and lattice constants inevitably induce crystal distortions and the formation of a defective interface, resulting in the reduction of the photocurrent and photovoltage. To alleviate these intrinsic problems and improve its photoelectrochemical (PEC) performance, we fabricated a Cu 2 O/CuO interface with high crystallinity and a well-aligned atomic arrangement by preparing a Cu 2 O absorber underlying layer preferentially oriented with [111] direction and forming a thin CuO overlayer (20–30 nm) via oxidation process at precisely controlled reduced oxygen partial pressure. At 5 Torr, the resultant Cu 2 O double-layer structure exhibited smooth crystallographic phase transition boundary from cubic Cu 2 O to monoclinic CuO and well-aligned lattice fringes. This exhibited considerable improvement in photocurrent density (2.8 mA/cm 2 at 0 V vs RHE) and onset potential (0.83 V), compared with those of pristine Cu 2 O. Importantly, these enhancements were achieved without coating of photocatalytic materials on the photoelectrodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI