光电流
材料科学
赤铁矿
钝化
光电子学
硅
分解水
图层(电子)
介电谱
光谱学
纳米技术
电极
光催化
冶金
化学
催化作用
物理化学
物理
量子力学
生物化学
电化学
作者
Zhongyuan Zhou,Shaolong Wu,Liujing Li,Liang Li,Xiaofeng Li
标识
DOI:10.1021/acsami.8b18681
摘要
Dual-absorber photoelectrodes have been proved to possess greater potential than the single-absorber systems in the applications of photoelectrochemical (PEC) cells (e.g., solar-driven water splitting); however, the mismatching of the energy bands and substantial carrier recombinations at the two absorber interfaces are normally subsistent. Here, we introduce an intermediate layer of conformal Al 2 O 3 into the silicon/hematite (Si/α-Fe 2 O 3 ) microwire photoanode for enriching the understanding of the interaction among the interlayer, inner absorber, and outer absorber. Our results show that the Si/Al 2 O 3 /α-Fe 2 O 3 microwire photoanode with the thickness-optimized Al 2 O 3 can lead to a substantial increase in the photocurrent from 0.83 to 2.08 mA/cm 2 at 1.23 V RHE (under 1 sun irradiation) and an obvious decrease in the onset potential relative to the counterpart without Al 2 O 3 . By analyzing the PEC responses under various monochromatic lights, PEC impedance spectroscopy, and intensity-modulated photocurrent spectroscopy, we ascribe the improvements to the fact that the suitable-thickness Al 2 O 3 can passivate the Si microwire surfaces and the bottom surfaces of the α-Fe 2 O 3 film and give rise to Al doping into the post-synthesized α-Fe 2 O 3 . These essential causes promote the carrier separation in α-Fe 2 O 3, diminish the photoanode surface recombination rate, and then increase the surface charge-transfer efficiency.
科研通智能强力驱动
Strongly Powered by AbleSci AI