串联
硅
材料科学
光电子学
能量转换效率
钙钛矿(结构)
薄脆饼
带隙
晶体硅
复合材料
化学
结晶学
作者
Eike Köhnen,Philipp Wagner,Felix Lang,Alexandros Cruz,Bor Li,Marcel Roß,Marko Jošt,Anna Belen Morales‐Vilches,Marko Topič,Martin Stolterfoht,Dieter Neher,Lars Korte,B. Rech,Rutger Schlatmann,Bernd Stannowski,Steve Albrecht
出处
期刊:Solar RRL
[Wiley]
日期:2021-04-21
卷期号:5 (7)
被引量:113
标识
DOI:10.1002/solr.202100244
摘要
Monolithic perovskite/silicon tandem solar cells recently surpass the efficiency of silicon single‐junction solar cells. Most tandem cells utilize >250 μm thick, planarized float‐zone (FZ) silicon, which is not compatible with commercial production using <200 μm thick Czochralski (CZ) silicon. The perovskite/silicon tandem cells based on industrially relevant 100 μm thick CZ‐silicon without mechanical planarization are demonstrated. The best power conversion efficiency (PCE) of 27.9% is only marginally below the 28.2% reference value obtained on the commonly used front‐side polished FZ‐Si, which are about three times thicker. With both wafer types showing the same median PCE of 27.8%, the thin CZ‐Si‐based devices are preferred for economic reasons. To investigate perspectives for improved current matching and, therefore, further efficiency improvement, optical simulations with planar and textured silicon have been conducted: the perovskite's bandgap needs to be increased by ≈0.02 eV when reducing the silicon thickness from 280 to 100 μm. The need for bandgap enlargement has a strong impact on future tandem developments ensuring photostable compositions with lossless interfaces at bandgaps around or above 1.7 eV.
科研通智能强力驱动
Strongly Powered by AbleSci AI