制氢
电极
无机化学
材料科学
离子交换
化学工程
化学
电化学
氢
电解
电解水
生产(经济)
膜
分解水
氢气净化器
离子
高温电解
膜反应器
质子交换膜燃料电池
碱性水电解
作者
Cheng Lyu,James Yule,Mikey Jones,Jack Corbin,Zhenyu Zhang,Xiaohong Li,Karen Hudson-Edwards,Haijiao Lu,Lianzhou Wang,Zhiliang Wang,gang wang,Ye Chen,Wenjun Zhang,Hua Zhang
标识
DOI:10.1016/j.jpowsour.2026.239271
摘要
Zero-gap water electrolysers have shown their potential in large scale green hydrogen production, but their cost effectiveness and long-term durability remain limited by an incomplete understanding of electrocatalysts and electrode materials behaviour during full-cell electrolysis. Here, a gasket-free anion exchange membrane water electrolyser (AEMWE) has been designed with an integrated reference electrode (RE) next to the membrane electrode assembly (MEA). A zero-gap design between the electrode and the membrane is achieved without the limitations of a gasket, ensuring close contact and minimising the system resistance and allowing precise monitoring of anode and cathode potentials individually during electrolysis. With NiFe(OH) 2 as the anode catalyst and Ni x S y as the cathode catalyst, electrolysis at a current density of 500 mA cm −2 was achieved at 1.86 V cell voltage with 1 M KOH electrolyte at 333 K. Electrochemical impedance spectroscopy (EIS) measurement with a Hg/HgO reference electrode during the electrolysis at the same conditions further reveal the potential loss distribution: 0.10 V from IR drop, 0.35 V from anode and 0.27 V from cathode. These results demonstrate a simple but useful platform for decoupling performance-limiting processes in AEMWE systems and guiding the design of more durable and efficient electrolysers.
科研通智能强力驱动
Strongly Powered by AbleSci AI