Dry reforming of methane (DRM) consists on the transformation of an equimolar mixture of CH4 and CO2 to CO and H2. This reaction could be an alternative to steam reforming of methane and allows valorising CO2 to chemicals. From thermodynamic point of view, this reaction is only favored above 700°C and low pressure (i.e. atmospheric pressure). It is also accompanied with the formation of different by-products including solid carbon, water and traces of light hydrocarbons.DRM is highly favored by the use of a solid catalyst [1]. Nickel-based catalysts appear as the most promising and have been largely studied in the literature. However, the deactivation phenomenon is omnipresent under the experimental conditions of DRM reaction because of solid carbon deposition on catalyst surface and thermal sintering of catalyst at high temperature.Hydroxyapatite (Ca10(PO4)6(OH)2) – or HAP – has been recently investigated as catalyst support for DRM reaction and very promising results have been obtained [2]. By controlling the molar ratio of Ca to P, the acido-basicity of this support can be adjusted which is a crucial factor for CO2 adsorption and dissociation. This support is also well known by its high thermal stability as well as its good ionic exchange capacity for divalent metals such as nickel and cobalt. In this work, DRM reaction over HAP-based catalysts has been studied. HAP support was synthesized from calcium carbonate (CaCO3) or calcium nitrate (Ca(NO3)2) as calcium sources and ammonium dihydrogen phosphate (NH4H2PO4) as phosphate source. Different monometallic or bimetallic catalysts containing Ni and/or Co were prepared and evaluated in DRM reaction. Different physico-chemical characterizations were also carried out to link the catalytic performance with the properties of the prepared catalysts. References [1] N. A. K. Aramouni, J. G. Touma, B. A. Tarboush, J. Zeaiter, M. N. Ahmad, Ren. Sust. Ener. Rev. 2018, 82, 2570-2585.[2] T. S. Phan, A. R. Sane, B. Rêgo De Vasconcelos, A. Nzihou, P. Sharrock, D. Grouset, D. Pham Minh, Appl. Catal. B: Env. 2018, 224, 310-321.