控制理论(社会学)
计算机科学
估计员
职位(财务)
反电动势
过程(计算)
跟踪误差
跟踪(教育)
航程(航空)
控制(管理)
接头(建筑物)
控制工程
电动势
模式(计算机接口)
电子速度控制
动作(物理)
电压
磁道(磁盘驱动器)
磁铁
错误检测和纠正
位置传感器
脉冲宽度调制
控制系统
观察员(物理)
同步电动机
机器控制
位置误差
作者
Xinran Shi,Hao Chen,Zeyuan Gao,Chao Gong,Xing Zhao,Li Ding,Yihua Hu
标识
DOI:10.1109/tpel.2025.3641960
摘要
This paper proposes a direct speed estimator based on the sliding mode principle (SM-DSE). Unlike conventional methods that rely on intermediary signals such as back electromotive force and high-frequency response current to obtain speed and position information, the SM-DSE achieves full speed range noise-free sensorless control without any intermediary signals. It is also applicable to both surface-mounted and interior permanent magnet synchronous motor. Firstly, the design process of the SM-DSE is introduced, along with explanations of how position is obtained through speed integration and how the initial position is determined. Secondly, by defining the tracking rate (TR) of the estimated speed, the paper analyzes the errors caused by speed integration and low-pass filter. The action states of the joint module are simulated to explore the relationship between the error, TR, and number of actions. Thirdly, to address these issues, this paper proposes a zero-crossing correction method based on the virtual-Z-pulse of the photoelectric encoder. By compensating the final position in each cycle based on the zero-crossing point, the accumulated integration error can be effectively eliminated. This enables the method to achieve high-precision, noise-free control over the full speed range, making it suitable for high precision control scenarios in robotic joint modules. Finally, experiments are conducted on both SPMSM and IPMSM to verify the effectiveness of the proposed sensorless control strategy.
科研通智能强力驱动
Strongly Powered by AbleSci AI