材料科学
微观结构
复合材料
结晶
差示扫描量热法
光学显微镜
相(物质)
扫描电子显微镜
韧性
透射电子显微镜
断裂韧性
粒度
衍射
去玻璃化
弹性模量
模数
动态力学分析
矿物学
抗弯强度
陶瓷
杨氏模量
光学透明度
作者
Qiang Fu,Charlene M. Smith,George H. Beall,Bryan R. Wheaton,Alana M. Whittier,Erika L. Stapleton,Ronald Parysek,Aram Rezikyan,Indrajit Dutta
摘要
ABSTRACT Transparent glass‐ceramics based on the petalite–lithium disilicate family offer a combination of exceptional optical clarity and mechanical robustness, making them desired candidates for applications such as protective covers for consumer electronics. This study investigates the relationship between ceramming conditions, microstructure, and optical and mechanical properties in this glass‐ceramics family. Using controlled heat‐treatment cycles, the crystallization behavior and phase evolution were characterized through differential scanning calorimetry (DSC), high‐temperature X‐ray diffraction (HTXRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Results from this work show that the ceramming temperature strongly influenced grain size, phase assemblage, and optical properties, with an optimal ceramming condition identified at 710°C. At this temperature, a fine‐grained microstructure (average grain size 29 nm) and favorable phase assemblage (petalite and lithium disilicate) produced the highest transparency and lowest haze (0.12% at 0.8 mm thickness, close to its precursor glass at 0.1%). The mechanical property of the glass‐ceramic improved significantly due to the crystallization process, with fracture toughness increasing from 0.77 in precursor glass to 1.13 MPa·m 0.5 in the glass‐ceramics and Young's modulus from 82 to 103 GPa. These findings indicate the importance of microstructural control and phase design in achieving highly transparent glass‐ceramics with enhanced performance, providing valuable insights for the development of advanced materials in optical and structural applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI