Abstract Although anion-exchange membrane water electrolysis (AEMWE) has attracted increasing attention as a promising platform that combines the advantages of alkaline water electrolysis (AWE) and proton-exchange membrane water electrolysis (PEMWE), there remains a strong need for electrode materials capable of operating under alkaline and high-current conditions while maintaining high electrochemical performance. In this study, we developed an S−Fe/NF backbone electrode through a simple and scalable fabrication strategy involving FeCl3-induced backbone engineering, Fe precursor immersion, and sulfurization on nickel foam. The FeCl3 treatment generates a porous backbone architecture that enhances catalyst anchoring and interfacial contact, while the subsequent Fe incorporation and sulfurization synergistically optimize the electrode structure and electrocatalytic activity. Consequently, the optimized S−Fe/NF backbone electrode exhibited enhanced OER activity, achieving low overpotentials of 264 and 315 mV at current densities of 50 and 100 mA cm−2, respectively, together with a low Tafel slope of 45.8 mV dec−1 in 1 M KOH, and maintained stable operation for 50 h at 50 mA cm−2 in a three-electrode configuration. Furthermore, when employed as the anode in an AEM water electrolyzer operated at 60 °C with 1 M KOH, the electrode delivered a current density of 2.298 A cm−2 at 2.0 V and maintained stable chronopotentiometric operation for 100 h at 0.5 A cm−2 under the investigated conditions. These results demonstrate that the synergistic integration of porous backbone engineering, Fe incorporation, and sulfurization provides an effective strategy for developing high-performance, noble-metal-free OER electrodes for high-current AEM water electrolysis.