锌酸盐
材料科学
阳极
电解质
碱性电池
储能
电极
电化学
锌
纳米技术
基质(水族馆)
枝晶(数学)
电偶阳极
沉积(地质)
导电体
化学工程
膜
过电位
流量(数学)
电镀
选择性
离子
阴极保护
电化学储能
电镀(地质)
氢
作者
Yuran Bai,Xiaoyu Huo,Xin Long,Enkang Fu,Xusong Gong,Lei Wei,Liang An
标识
DOI:10.1002/adfm.202532116
摘要
ABSTRACT Alkaline zinc‐based flow batteries (ZFBs) are emerging as promising candidates for grid‐scale energy storage owing to the high abundance and low cost of zinc, relatively high cell voltages, inherent safety, and environmental compatibility. However, their practical deployment is critically hindered by zinc anode‐related degradation. This review provides a comprehensive, mechanism‐based summary of recent progress in stabilizing zinc anodes in alkaline ZFBs. Zinc deposition mechanisms and failure modes in alkaline media are clarified, emphasizing the intrinsic links among dendrite formation, passivation, hydrogen evolution, corrosion, and “dead Zn” accumulation. The stabilization strategies are classified into three main categories: (1) Electrode engineering, utilizing 3D conductive scaffolds to homogenize current and ion fluxes, zincophilic sites to direct nucleation, along with protective coatings and substrate alloying to suppress side reactions. (2) Electrolyte engineering, encompassing the modulation of electrochemical kinetics, interfacial regulation via electrostatic shielding, and the chemical reactivation of “dead Zn”. (3) Membrane engineering, focusing on functionalized architectures to redistribute zincate diffusion, enhance ion selectivity against crossover, and mechanically block dendrite penetration. Collectively, these strategies provide design guidelines for developing alkaline ZFBs with long lifetime and scalability for large‐scale energy storage.
科研通智能强力驱动
Strongly Powered by AbleSci AI