材料科学
腐蚀
熔渣(焊接)
冶金
坩埚(大地测量学)
刚玉
回转窑
焚化
剥落
克罗米亚
窑
废物管理
合金
工程类
计算化学
化学
作者
Johannes Boersma,Annelies Niewijk,Z. Gao
标识
DOI:10.1016/j.ceramint.2022.11.312
摘要
Selecting the most suitable refractory lining from various types/grades of products provided by different suppliers for the hazardous waste incineration rotary kiln is not an easy job to reach a 23-month lifetime. Real-life industrial scale test is time-consuming, i.e., only one or two new products can be tested each year or every other year. Crucible test is a fast way to give a first assessment to test the adaptability of a given product to a slag. However, the classic visual observation to determine the slag penetration zone is usually inconclusive when the materials of the same group are tested and can be sometimes misleading. In this study, crucible tests were performed for 10 commercial chromia-corundum bricks from various sources. After examined with detailed analysis with SEM (Scanning Electron Microscopy) and EDS (Energy Dispersive X-Ray Spectroscopy), highly precise quantitative values of corrosion zones width for samples are derived. A non-dimensional number, the Wear ratio, is introduced as a quantitative criterion to characterize the refractory corrosion resistance. By using this Wear ratio, a correlation is found with the chromia concentration. Quantitative results obtained by this criterion are in line with the real-life observations of industrial scale tests.
科研通智能强力驱动
Strongly Powered by AbleSci AI