Numerical and Experimental Study of Low-Frequency Membrane Damper for Tube Vibration Suppression

In modern days, low-frequency vibration is still challenging to suppress due to its high vibrational energy. A typical suppression method is to increase the object’s mass to reduce the amplitude of the vibration, but such a way is unsuitable in many cases. Membrane dampers can potentially eliminate the limitation and offer lightweight and compact damper. The idea is to decrease the stiffness and add additional mass to increase the dissipation of the vibration energy. For that, the membrane and an extra mass made of silicone rubber were used for the damper. Finite element eigenfrequency simulation showed the transformation of each mode to the damper mode, where the tube displacement was zero. Also, it showed the bandgap between modes in the frequency range from 106 Hz to 158 Hz. The experimental verification of clamped from both ends of the tube showed the predicted bandgap and absence of the resonance peak of the bare tube. Overall, the membrane damper showed good efficiency in extremely low frequencies and seems promising for vibration suppression.