可加工性
硒化锌
材料科学
机械加工
脆性
光学
金刚石车削
复合材料
微晶
钻石
振动
撕裂
冶金
光电子学
声学
物理
作者
Shanyi Ma,Yujiang Lu,Yufan Fu,Xinhuan Li,Jianjun Lai,Jianguo Zhang,Xiao Chen,Junfeng Xiao,Jianfeng Xu
出处
期刊:Optics Express
[Optica Publishing Group]
日期:2023-11-28
卷期号:32 (1): 482-482
被引量:4
摘要
Polycrystalline zinc selenide is widely used in advanced optical systems due to its superior optical properties. However, the soft and brittle properties bring a challenge for high-quality surface processing. In recent years, elliptical vibration cutting has been proven as a promising method for machining brittle materials. In the present research, a series of grooving and planning experiments were carried out to investigate the machinability of zinc selenide with elliptical vibration cutting. The removal mechanism was analyzed from fracture characteristics, chip morphology, and phase transformation. The results show that elliptical vibration cutting is effective in suppressing cleavage-induced craters. Reducing the nominal cutting speed is beneficial to inhibit the spring back-induced tearing of grains. A 94-time increase in the critical depth of cut was achieved by vibration trajectory optimization compared to ordinary cutting. Moreover, the influence mechanism of feed on the evolution of surface morphology was revealed. Finally, a zinc selenide microlens array was successfully fabricated. The performance was evaluated by geometric parameter measurements and a multiple imaging test. The findings provide a prospective method for ductile regime machining of zinc selenide.
科研通智能强力驱动
Strongly Powered by AbleSci AI