材料科学
复合材料
聚合物
抗压强度
极限抗拉强度
复合数
抗弯强度
开裂
纤维
应变硬化指数
作者
Jian Wei Zhou,Zhenjun Li,Liu Xi,Xinzhuo Yang,Jiaojiao Lv
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2024-06-13
卷期号:16 (12): 1685-1685
被引量:10
标识
DOI:10.3390/polym16121685
摘要
In this study, seven Engineering Geopolymer Composite (EGC) groups with varying proportions were prepared. Rheological, compressive, flexural, and axial tensile tests of the EGC were conducted to study the effects of the water/binder ratio, the cement/sand ratio, and fiber type on its properties. Additionally, a uniaxial tension constitutive model was established. The results indicate that the EGC exhibits early strength characteristics, with the 7-day compressive strength reaching 80% to 92% of the 28-day compressive strength. The EGC demonstrates high compressive strength and tensile ductility, achieving up to 70 MPa and 4%, respectively. The mechanical properties of the EGC improved with an increase in the sand/binder ratio and decreased with an increase in the water/binder ratio. The stress-strain curve of the EGC resembles that of the ECC, displaying a strain-hardening state that can be divided into two stages: before cracking, the matrix primarily bears the stress; after cracking, the slope decreases, and the fiber predominantly bears the stress.
科研通智能强力驱动
Strongly Powered by AbleSci AI