材料科学
焊接
对接接头
微观结构
动态再结晶
搅拌摩擦焊
再结晶(地质)
复合材料
搭接接头
腐蚀
冶金
合金
接头(建筑物)
对焊
极限抗拉强度
结构工程
热加工
生物
工程类
古生物学
作者
Jiuxing Tang,Guoxin Dai,Lei Shi,Chuansong Wu,С. А. Миронов,Surendra Kumar Patel,Song Gao,Mingxiao Wu
标识
DOI:10.1186/s10033-024-01034-4
摘要
Abstract A novel double side friction stir Z shape lap-butt welding (DS-FSZW) process was proposed to achieve excellent mechanical properties of Al/Cu medium-thick dissimilar joints. The influence of welding parameters on weld microstructure and properties of DS-FSZW joint were systematically investigated. It indicated that defect-free medium-thick Al/Cu DS-FSZW joint could be achieved under an optimal welding parameter. DS-FSZW joint was prone to form void defects in the bottom of the second-pass weld. The recrystallization mechanisms at the top and middle of the weld nugget zone (WNZ) were continuous dynamic recrystallization (CDRX) and geometric dynamic recrystallization (GDRX). While the major recrystallization mechanism at the bottom of the WNZ was GDRX. DS-FSZW joint of the optimal welding condition with 850 r/min-400 mm/min was produced with a continuous thin and crack-free IMCs layer at the Al/Cu interface, and the maximum tensile strength of this joint is 160.57 MPa, which is equivalent to 65.54% of pure Cu base material. Moreover, the corrosion resistance of Al/Cu DS-FSZW joints also achieved its maximum value at the optimal welding parameter of 850 r/min-400 mm/min. It demonstrates that the DS-FSZW process can simultaneously produce medium-thick Al/Cu joints with excellent mechanical performance and corrosion resistance.
科研通智能强力驱动
Strongly Powered by AbleSci AI