发电机(电路理论)
中子发生器
信号处理
计算机科学
电气工程
信号(编程语言)
数据处理
虚拟仪器
中子
核工程
计算机硬件
核物理学
物理
数据采集
数字信号处理
中子源
工程类
功率(物理)
操作系统
量子力学
程序设计语言
作者
Shangqing Sun,Qichang Huang,Bo Wan,Daibo Yang,Yang Zhao,Miao Wang,Bangping Xiong,Guoyu Xi,Ying Luo,Yuan Xia,Wenbin Wei,Yanping Miao
标识
DOI:10.1088/1748-0221/20/01/p01014
摘要
Abstract Neutron measurement systems play a crucial role in many fields. However, testing these systems requires neutron sources, which pose radiation hazards. As a safer alternative, developers often opt for simulated neutron signal generators. The goal of this study is to develop a virtual neutron signal generator that meets the development needs of neutron measurement system in pulse mode, campbell mode, and current mode, providing a non-nuclear auxiliary design tool. Inside the Loongson CPU, three digital channels are used to generate pulse signal, campbell signal and current signal. Each digital channel consists of the amplitude module, trigger module and waveform module. The amplitude module uses either measured spectrum or simulated spectrum generated by GEANT4 to obtain physically meaningful neutron pulse amplitudes. The trigger module generates a high-speed triggered clock sequence based on the exponentially distributed time intervals between adjacent neutron pulses. The waveform module generates the waveform of neutron signals. The neutron signals generated inside the Loongson CPU are transmitted to the FPGA via USB3.0. Then, the FPGA outputs virtual neutron analog signals through DAC. Experimental results show that this virtual neutron signal generator can accurately produce virtual neutron analog signals, making it suitable as a testing tool for neutron measurement systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI