Preparation of strong, UV-blocking and sustainable glucose-cross-linked cellulose plastics via hydroxyl-yne click reaction

The construction of functional cellulose plastics possessing strong UV-blocking, hydrophilicity, and biodegradability is challenging. Therefore, we provide a novel strategy to successfully prepare sustainable and hydrophilic glucose-cross-linked cellulose (GC) plastics showing effective UV-blocking and excellent mechanical properties via hydroxyl-yne click reaction at room temperature. The results demonstrated that hydroxyl-yne click chemistry enabled efficient crosslinking of cellulose with glucose using 4-dimethylamino pyridine (DMAP) as a catalyst. Moreover, the DMAP residue imparted good UV-shielding properties to GC films exhibiting nearly 100 % UVC (200–275 nm) and 100 % UVB (320–275 nm) shielding ratios. The introduction of glucose imparted superior hydrophilicity (water contact angle of 40.3–43.2°) and improved water adsorption. Additionally, the mechanical properties of the GC films increased with the increasing crosslinking density, and the highest tensile stress was 94 MPa. The water-induced breaking and hydrogen bond reforming strategy led to a stress of 127 MPa and a strain of 25.6 % for the final GC2 film, which were excellent compared to those of the most reported cellulose films. Additionally, GC films were biosafe, exhibited improved oxygen barrier, and good biodegradability. Hence, this study provides a promising and efficient approach for preparing high-performance cellulose plastics.