Enhancement of struvite generation and anti-fouling in an electro-AnMBR with Mg anode-MF membrane module

Severe membrane fouling and the inability to remove/recover nitrogen and phosphorus are bottlenecks of anaerobic membrane bioreactors (AnMBRs) for large-scale application in wastewater treatment. Herein, an electrochemical AnMBR with a Mg anode-membrane module (electro-AnMBR) was built and showed good performance in terms of membrane fouling mitigation and nutrient recovery during sewage treatment. Compared with the traditional AnMBR, membrane fouling in the electro-AnMBR was reduced by up to 30%. The application of an electric field decreased the zeta potential, viscosity, and EPS concentration of the sludge-water liquor in the electro-AnMBR, which could improve the cake layer structure and thus enhance water permeability. Meanwhile, 26% of NH4+ and 48% of PO43- co-precipitated with Mg2+ generating from the sacrificial Mg anode and were recovered as struvite deposited onto cathode in the electro-AnMBR. Hydrogen evolution provided a relatively alkaline pH environment, resulting in struvite electrodeposition on the graphic cathode, which partly separated the formed struvite from the sludge with a purity of 77%. In the electro-AnMBR, the electrochemical reactions provided alkalinity and effectively inhibited anaerobic acidification. The applied voltage of 0.6 V reduced the relative abundance of methanosaeta, but increased that of methanosarcina, which is also beneficial for the membrane anti-fouling.