Noise reduction efficiency of Helmholtz resonator in simulated channel of HVAC system

Aims: The purpose of this article was investigating the efficiency of designing resonator in decreasing low noises. Materials and Methods: The designed Helmholtz resonator was installed in a channel analogous to ventilation channel. The resonator was produced signals at very low frequencies (125-500 Hz) and sound pressure levels 60-90 dB and transmitted through a channel by means of a speaker. Afterwards, the variation of sound pressure level was monitored and then intra-channel signals processing and preparing of sound Algorithm in channel was done by MATLAB software. Results: The highest decrease of sound pressure level at 125 Hz frequency among of Helmholtz resonators was observed at chamber diameter of 63 mm and resonator's 1 cm-caliber. Sound pressure level reductions of 0-10 dB were achieved in an experimental duct system using a Helmholtz resonator.Conclusions: This research showed that the designed Helmholtz resonators at a certain frequency of low-frequency sound demonstrated the soundest decrease. The increase in the Helmholtz resonators' chamber volume and their neck's pass area are negatively associated with the rate of sound resonance. As a result, of determining the effective frequency range of the Helmholtz resonator, the designed resonator could be applied as an effective and efficient instrument of removing or decreasing noise.