材料科学
薄膜
氮化硅
氮化物
硅
光电子学
表征(材料科学)
分析化学(期刊)
氮化硅
纳米技术
化学工程
沉积(地质)
溅射沉积
化学气相沉积
电介质
基质(水族馆)
等离子体增强化学气相沉积
图层(电子)
作者
Kwangchol Park,Won-Deok Yun,Byoungjun Choi,Heon-Do Kim,Wonjun Lee,Sa-Kyun Rha,Chong Rae Park
标识
DOI:10.1016/j.tsf.2009.01.118
摘要
We deposited silicon nitride films by alternating exposures to Si 2 Cl 6 and NH 3 in a cold-wall reactor, and the growth rate and characteristics were studied with varying process temperature and reactant exposures. The physical and electrical properties of the films were also investigated in comparison with other silicon nitride films. The deposition reaction was self-limiting at process temperature of 515 and 557 °C, and the growth rates were 0.24 and 0.28 nm/cycle with Si 2 Cl 6 exposure over 2 × 10 8 L These growth rates with Sl 2 Cl 6 are higher than that with SiH 2 Cl 2 , and are obtained with reactant exposures lower than those of the SiH 2 Cl 2 case. At process temperature of 573 °C where the wafer temperature during Si 2 Cl 6 pulse is 513 °C, the growth rate increased with Si 2 Cl 6 exposure owing to thermal deposition of Si 2 Cl 6 . The deposited films are nonstoichiometric SiN, and were easily oxidized by air exposure to contain 7-8 at.% of oxygen in the bulk film. The deposition by using Si 2 Cl 6 exhibited a higher deposition rate with lower reactant exposures as compared with the deposition by using SiH 2 Cl 2 , and exhibited good physical and electrical properties that were equivalent or superior to those of the film deposited by using SiH 2 Cl 2 .
科研通智能强力驱动
Strongly Powered by AbleSci AI