风力发电
工程类
汽车工程
机械工程
制造工程
电气工程
计算机科学
作者
Yizhou Ye,Shu Wan,Shen Li,Xuefeng He
标识
DOI:10.1109/tim.2022.3189732
摘要
In this paper, a mechanical wind sensor based on additive manufacturing technology is demonstrated for the first time. The sensor is composed of a cylindrical sensing structure vertically placed in the center of a cross-shape cantilever. Four strain gauges are attached to the surface of the beams to monitor the wind-induced cantilever deformation which can reveal the speed and direction of airflow. Unlike traditional mechanical sensors, the proposed wind sensor is fabricated by additive manufacturing. With this new manufacturing method, the wind sensor can not only be flexibly designed to avoid mechanical wear, but also utilize corrosion-resistant organic materials for improved reliability. The designed wind sensor is implemented using a commercially-available three-dimensional (3D) printer, and installed in a wind tunnel for the experiment. The test results show that the proposed 3D printed mechanical wind sensor can achieve a measurement speed range up to 30 m/s, with a maximum error of 0.87 m/s, while the maximum errors for wind direction measurement are ±8°, over the full range of 360°. The proposal of this 3D printed wind sensor provides a new paradigm for developing small-size, low-cost, and high-reliability wind sensors.
科研通智能强力驱动
Strongly Powered by AbleSci AI