Kinetics Study on the Hydrogen Reduction of Bauxite Residue-Calcite Sintered Pellets at Elevated Temperature

In this study, the isothermal reduction of bauxite residue-calcite sintered pellets by hydrogen at elevated temperatures and different gas flow rates was investigated. A thermogravimetric technique was applied to study the kinetics of the direct reduction by H2 at 500–1000 °C. It was observed that iron in sintered oxide pellets mainly exists in the form of brownmillerite, srebrodolskite and fayalite. The reduction of brownmillerite, the dominant Fe-containing phase, with hydrogen produces mayenite, calcite and metallic iron. X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), BET surface area, pycnometer and mercury intrusion porosimeter analyses were adopted on reduced pellets to interpret the experimental results. The order of the reduction process changes from first-order reaction kinetics to second-order with an increasing reduction temperature. The change in reaction order may be due to sintering at higher reduction temperatures and corresponding physical and microstructural changes in pellets. The activation energy of reduction was calculated as 55.1–96.6 kJ/mol based on the experimental conditions and using different kinetic model equations. From the experimental observations, it was found that 1000 °C with 60 min is the most suitable condition for bauxite residue-CaO sintered pellets’ reduction with hydrogen.