Orthopedic Rehabilitation Using the “Rutgers Ankle” Interface

A novel ankle rehabilitation device is being developed for home use, allowing remote monitoring by therapists. The system will allow patients to perform a variety of exercises while interacting with a virtual environment (VE). These game-like VEs created with WorldToolKit run on a host PC that controls the movement and output forces of the device via an RS232 connection. Patients will develop strength, flexibility, coordination, and balance as they interact with the VEs. The device will also perform diagnostic functions, measuring the ankle's range of motion, force exertion capabilities and coordination. The host PC transparently records patient progress for remote evaluation by therapists via our existing telerehabilitation system. The “Rutgers Ankle” Orthopedic Rehabilitation Interface uses double-acting pneumatic cylinders, linear potentiometers, and a 6 degree-of-freedom (DOF) force sensor. The controller contains a Pentium single-board computer and pneumatic control valves. Based on the Stewart platform, the device can move and supply forces and torques in 6 DOFs. A proof-of-concept trial conducted at the University of Medicine and Dentistry of New Jersey (UMDNJ) provided therapist and patient feedback. The system measured the range of motion and maximum force output of a group of four patients (male and female). Future medical trials are required to establish clinical efficacy in rehabilitation.