Air-Stable Ni Catalysts Prepared by Liquid-Phase Reduction Using Hydrosilanes for Reactions with Hydrogen

The liquid-phase reduction method for the preparation of metal nanoparticles (NPs) by the reduction of metal salts or metal complexes in a solvent with a reducing agent is widely used to prepare Ni NPs that exhibit high catalytic activity in various organic transformations. Intensive research has been conducted on control of the morphology and size of Ni NPs by the addition of polymers and long-chain compounds as protective agents; however, these agents typically cause a decrease in catalytic activity. Here, we report on the preparation of Ni NPs using hydrosilane (Ni-Si) as a reducing agent and a size-controlling agent. The substituents on silicon can control not only the size but also the crystal phase of the Ni NPs. The prepared Ni NPs exhibited high catalytic performance for the hydrogenation of unsaturated compounds, aromatics, and heteroaromatics to give the corresponding hydrogenated products in high yields. The unique feature of Ni catalysts prepared by the hydrosilane-assisted method is that the catalysts can be handled under air as opposed to conventional Ni catalysts such as Raney Ni. Characterization studies indicated that the surface hydroxide was reduced under the catalytic reaction conditions with H2 at around 100 °C and with the assistance of organosilicon compounds deposited on the catalyst surface. The hydrosilane-assisted method presented here could be applied to the preparation of supported Ni catalysts (Ni-Si/support). The interaction between the Ni NPs and a metal oxide support enabled the direct amination of alcohols with ammonia to afford the primary amine selectively.